Set comprising:
1x PU cut protection gloves, Comfort Skin, level B
+ 1x e.s. Nitrile foam gloves evertouch micro
+ 1x Disposable nitrile gloves, powder-free
+ 1x Nitrile gloves Flexible
+ 1x PU micro gloves comfort skin
+ 1x Vinyl knitted gloves
1x PU cut protection gloves, Comfort Skin, level B:
- EN 388:2016, Mechanical risks, 3X42B
- Good cut resistance thanks to cut protection level B
- Extra lightweight, special fine-knit design with HPPE fibres (High Performance Polyethylene)
- Palm with extra thin polyurethane coating
- Ideal fit
- Application field: Warehousing and precision mechanics with slightly sharp objects
- Length: approx. 26 cm
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number, the better the test result.
Textile gloves, partially coated
Thanks to small PVC bumps on the palms of the gloves or a full-surface PVC impregnation, the partially coated textile gloves have a good grip and are durable whilst remaining breathable. Very suitable for assembly, sorting and transport work.
Polyurethane-coating
- Flexible and elastic
- Breathable
- Good grip in oil
- For precision work
Polyurethane
Thanks to the polyurethane coating – the gloves are liquid-repellent and highly durable with an excellent grip. Gloves with a polyurethane coating are used wherever high mechanical loads and sharp materials are expected.
Textile gloves, coated
Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.
+ 1x e.s. Nitrile foam gloves evertouch micro:
- EN 388:2016, Mechanical risks, 4121X
- Extremely flexible, fine knit polyamide
- Thin nitrile foam coating, liquid-repellent
- Extremely sensitive glove with ideal fit
- Application areas: Suitable for precision assembly work
- Length: approx. 25 cm
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number, the better the test result.
Textile gloves, coated
Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.
Nitrile foam coating
- roughened coating
- very breathable
- good wet and oily grip
- slight vibration damping
- for precision to heavy-duty work
+ 1x Disposable nitrile gloves, powder-free:
- EN ISO 374-5:2016, Chemicals and Micro Organisms
- EN ISO 374-1:2016 - Typ B, chemical risks, KPT
- AQL 1.5
- With rolled cuf
- Latex-free, therefore hypoallergenic
- Roughened palm
- Resistant to punctures and wear, in latex or vinyl
- Excellent dexterity
- Application areas: Ideal for handling food, in laboratory or medical environments
- Length: approx. 24 cm
100 items per dispenser box (size: 25.0 x 7,5 cm)
Microorganisms
It is usually assumed that protection gloves that withstand penetration in the test, offer effective protection against bacteria and fungi. However, because many viruses are much smaller than bacteria and fungi, these protection gloves may offer inadequate protection in practical fields.
A protection glove that is resistant to bacteria is a watertight glove that has a maximum AQL value of 1.5 in the permeability test. The AQL value (AQL = Acceptable Quality Level) reflects a given limit or the minimum quality requirement.
In general, the lower the AQL value, the better the quality of the protection gloves.
Protection against microorganisms:
Gloves that protect against bacteria and fungi. Not tested against viruses.
AQL-value
Acceptable Quality Level = procedure for determining quality. The DIN EN 455 defines a tightness value of at least 1.5 for medical disposable gloves.
Powder-free
Ideal for allergy sufferers.
Latex-free
In case of latex allergy, employers must provide latex-free gloves.
Nitrile
sturdy and durable disposable gloves that are pleasant to wear. Ideal for medical work and food processing sectors.
Food-safe
These gloves are suitable for contact with food in compliance with Regulation (EC) No. 1935:2004 (on materials and items intended to come into contact with food).
Full chemical protection gloves primarily aim to protect the hands against chemicals. They are assigned to the PSA Category III. Due to the infinite range of chemicals, there is no one specific glove that will offer protection against all liquids. Instead, the best product must be selected for the task at hand. Full chemical protection has a protection index of at least 2, i.e. a permeation time > 30 minutes for at least 3 of 12 statutory defined test chemicals. (Permeation = penetration on a molecular level).
TYPE B
Permeation performance at least level 2, >30 minutes against at least three chemicals in the list:
Testing Criteria:
A- Methanol
B- Acetone
C- Acetonitrite
D- Di-chloromethane
E- Carbon disulphide
F- Tuluol
G- Diethylamine
H- Tetrahydrofuran
I- Ethyl acetate
J- N-Heptane
K- Sodium hydroxide 40 %
L- Sulphuric acid 96 %
M- Nitric acid 65%
N- Acetic acid 99 %
O- Ammonium hydroxide 25 %
P- Hydrogen peroxide 30 %
S- Hydrofloric acid 40 %
T- Formaldehyde 37 %
+ 1x Nitrile gloves Flexible:
- EN 388:2016, Mechanical risks, 4132X
- Polyamide fine-knit gloves for an ideal fit and dexterity
- Palm with a light nitrile coating, oil-repellent and great grip
- Applications: Suitable for assembling oily and dry parts, packaging, inspections etc. and work that needs to repel oil, requires a good grip and a perfect fit, ideal for precision assembly work
- Length: approx. 23.5 cm
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number, the better the test result.
Textile gloves, coated
Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.
Nitrile coating
- Sturdy coating
- Good resistance to oil, grease and hydrocarbons
- Good insulation
- Good dry and oily grip
- For medium to heavy-duty work
+ 1x PU micro gloves comfort skin:
- EN 388:2016, Mechanical risks, 3121X
- Polyamide fine-knit gloves – feel like a second skin
- Palm with extra thin polyurethane coating, Therefore an ideal fit
- Application areas: Warehousing, quality control and product protection and for work that requires better grip security and a perfect fit
- Length: approx. 25 cm
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number, the better the test result.
Textile gloves, coated
Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.
Polyurethane-coating
- Flexible and elastic
- Breathable
- Good grip in oil
- For precision work
Polyurethane
Thanks to the polyurethane coating – the gloves are liquid-repellent and highly durable with an excellent grip. Gloves with a polyurethane coating are used wherever high mechanical loads and sharp materials are expected.
+ 1x Vinyl knitted gloves:
- EN 388:2016, Mechanical risks, 2121X
- Made of extremely elastic, fine-knit cotton stretch carrier material
- Palm with medium-thickness vinyl foam coating
- Ideal impact absorption and anti-vibration effect
- Flexible width regulation thanks to Velcro fastener
- Applications: Ideal for moderate assembly work in primarily dry environments
- Length: approx. 24 cm
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number, the better the test result.
Textile gloves, coated
Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.
Vinyl foam coating
- Roughened coating
- good breathability
- Good dry grip
- Slight vibration damping
- For precision work