from 10 pair: 2,89
from 10 pair: 2,89
from 100 pair: 2,77
from 300 pair: 2,66
The quoted delivery time in working days applies to deliveries within Germany and does not include weekends or bank holidays. The delivery date of the goods depends on the selected payment type.
Deliveries against prepayment usually be delivered on working days (Monday to Friday) once payment has been received.
Deliveries on account, or direct debit, PayPal, credit card and COD order usually be delivered on working days (Monday to Friday) once the order has been received.
If the goods are embroidered, printed or designed in any way to your specifications, the delivery date will be agreed separately for the specific order.
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Abrasion Resistance: 0-4
Cut Resistance: 0-4
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
It is usually assumed that protection gloves that withstand penetration in the test, offer effective protection against bacteria and fungi. However, because many viruses are much smaller than bacteria and fungi, these protection gloves may offer inadequate protection in practical fields.
A protection glove that is resistant to bacteria is a watertight glove that has a maximum AQL value of 1.5 in the permeability test. The AQL value (AQL = Acceptable Quality Level) reflects a given limit or the minimum quality requirement.
In general, the lower the AQL value, the better the quality of the protection gloves.
Protection against microorganisms:
Gloves that protect against viruses, bacteria and fungi.
Full chemical protection gloves primarily aim to protect the hands against chemicals. They are assigned to the PSA Category III. Due to the infinite range of chemicals, there is no one specific glove that will offer protection against all liquids. Instead, the best product must be selected for the task at hand. Full chemical protection has a protection index of at least 2, i.e. a permeation time > 30 minutes for at least 3 of 12 statutory defined test chemicals. (Permeation = penetration on a molecular level).
Gloves marked with a conical flask offer full chemical protection. The chemicals against which the gloves offer protection are identified with a letter below the pictogram.
Permeation performance at least level 2, >30 minutes against at least six chemicals in the list:
E- Carbon disulphide
I- Ethyl acetate
K- Sodium hydroxide 40 %
L- Sulphuric acid 96 %
M- Nitric acid 65 %
N- Acetic acid 99 %
O- Ammonium hydroxide 25%
P- Hydrogen peroxide 30 %
S- Hydrofloric acid 40 %
T- Formaldehyde 37 %
Durable coating with oil, grease and hydrocarbon resistance. Despite the solid coating, no sensitivity is lost. The coating is ideal when working with oily or dry materials.
Our assessments are based on practical experience. The valid EN standards have not been taken into consideration. The properties of the individual gloves were assessed in comparison to all other gloves of the respective material group. The higher the assessment, the more suitable the glove is for this field.
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.