Shipping costs at engelbert strauss
Within Germany:
We deliver free of charge from an order value of 178,50 EUR (inc VAT). If your order lies below this value, shipping costs will only total 5,95 EUR (inc VAT) or 7,74 EUR (inc VAT) for order values below 59,50 EUR (inc VAT).
Other countries:
We are also able to deliver to different countries, if this is possible under customs law. We will inform you of the shipping costs when we confirm your order / issue your prepayment order summary. Customs duty, taxes and fees will be charged directly to the recipient by the freight forwarder.
All packaging costs are borne by engelbert strauss.
The quoted delivery time in working days applies to deliveries within Germany and does not include weekends or bank holidays. The delivery date of the goods depends on the selected payment type.
Deliveries against prepayment usually be delivered on working days (Monday to Friday) once payment has been received.
Deliveries on account, or direct debit, PayPal, credit card and COD order usually be delivered on working days (Monday to Friday) once the order has been received.
If the goods are embroidered, printed or designed in any way to your specifications, the delivery date will be agreed separately for the specific order.
Promotional set comprising of:
1x PU cut protection gloves, Comfort Skin, level B
+ 1x e.s. Nitrile foam gloves evertouch micro
+ 1x Latex knitted gloves Senso Grip
+ 1x Nitrile special gloves Nitril Plus
+ 1x Neoprene micro gloves
+ 1x Nitrile foam gloves Flexible Pro
1x PU cut protection gloves, Comfort Skin, level B:
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-4
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Textile gloves, partially coated
Thanks to small PVC bumps on the palms of the gloves or a full-surface PVC impregnation, the partially coated textile gloves have a good grip and are durable whilst remaining breathable. Very suitable for assembly, sorting and transport work.
Polyurethane-coating
Polyurethane
Thanks to the polyurethane coating – the gloves are liquid-repellent and highly durable with an excellent grip. Gloves with a polyurethane coating are used wherever high mechanical loads and sharp materials are expected.
+ 1x e.s. Nitrile foam gloves evertouch micro:
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-4
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Textile gloves, coated
Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.
Nitrile foam coating
+ 1x Latex knitted gloves Senso Grip:
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-4
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Textile gloves, coated
Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.
Latex coating
+ 1x Nitrile special gloves Nitril Plus:
Microorganisms
It is usually assumed that protection gloves that withstand penetration in the test, offer effective protection against bacteria and fungi. However, because many viruses are much smaller than bacteria and fungi, these protection gloves may offer inadequate protection in practical fields.
A protection glove that is resistant to bacteria is a watertight glove that has a maximum AQL value of 1.5 in the permeability test. The AQL value (AQL = Acceptable Quality Level) reflects a given limit or the minimum quality requirement.
In general, the lower the AQL value, the better the quality of the protection gloves.
Protection against microorganisms:
Gloves that protect against bacteria and fungi. Not tested against viruses.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-4
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Full chemical protection gloves primarily aim to protect the hands against chemicals. They are assigned to the PSA Category III. Due to the infinite range of chemicals, there is no one specific glove that will offer protection against all liquids. Instead, the best product must be selected for the task at hand. Full chemical protection has a protection index of at least 2, i.e. a permeation time > 30 minutes for at least 3 of 12 statutory defined test chemicals. (Permeation = penetration on a molecular level).
Gloves marked with a conical flask offer full chemical protection. The chemicals against which the gloves offer protection are identified with a letter below the pictogram.
TYPE A
Permeation performance at least level 2, >30 minutes against at least six chemicals in the list:
Testing Criteria:
A- Methanol
B- Acetone
C- Acetonitrite
D- Di-chloromethane
E- Carbon disulphide
F- Tuluol
G- Diethylamine
H- Tetrahydrofuran
I- Ethyl acetate
J- N-Heptane
K- Sodium hydroxide 40 %
L- Sulphuric acid 96 %
M- Nitric acid 65 %
N- Acetic acid 99 %
O- Ammonium hydroxide 25%
P- Hydrogen peroxide 30 %
S- Hydrofloric acid 40 %
T- Formaldehyde 37 %
Nitrile gloves
Durable coating with oil, grease and hydrocarbon resistance. Despite the solid coating, no sensitivity is lost. The coating is ideal when working with oily or dry materials.
+ 1x Neoprene micro gloves:
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-4
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Nitrile/neoprene coating
+ 1x Nitrile foam gloves Flexible Pro:
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-4
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Textile gloves, coated
Thanks to the use of various coats, the hands are well protected in coated textile gloves whatever the task. Depending on the gloves chosen, the wear-resistant gloves offer excellent dexterity and are resistant to oil, grease and wet. Non-slip grip under light to heavy loads.
Nitrile foam coating